Disclaimer2020 Lincoln Truck MKT FWD V6-3.7L Technical Service Bulletin # 10-7-2 Date: 100426
Brakes - Rear Brake Drag/Cyclic Noises
TSB 10-7-2
04/26/10
REAR BRAKE DRAG OR REAR BRAKE NOISE -
BUILT ON OR BEFORE 12114/2009
FORD:
2010 Taurus
2009-2010 Flex
2020 Lincoln Truck MKT FWD V6-3.7L Page 18
LINCOLN:
2009-2010 MKS
2010 MKT
This article supersedes TSB 09-26-10 to add a production fix date.
ISSUE
Some 2009-2010 Flex, MKS and 2010 Taurus and MKT built on or before 12/14/2009 may exhibit rear brake drag and/or off-brake cyclic noise.
The noise may be caused by pad to piston misalignment or corrosion on the brake caliper bracket.
ACTION
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
1. Remove the rear wheels and tires per Workshop Manual (WSM), Section 204-04.
2. Remove the rear brake pads as per WSM, Section 206-00. The notch in the caliper piston should be aligned with the pin on the backside of the
inboard brake pad. (Figure 1)
3. Replace the caliper anchor bracket and anchor bracket bolts.
a. Ensure the piston slots are aligned per WSM, Section 206-00.
b. The new caliper anchor brackets should have a small amount of grease under the brake pad spring clips.
c. Grease should not be applied to the sur[ace of the spring clips or come into contact with the pads.
4. Install new brake pads per WSM, Section 206-00.
5. Install the rear wheels and tires WSM, Section 204-04.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies
2020 Lincoln Truck MKT FWD V6-3.7L Page 19
are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
100702A 2009-2010 Flex, 2010 0.8 Hr.
MKT: Replace The Rear
Brake Pads, And Caliper
Anchor Bracket (Do Not
Use With Any Other Labor
Operations)
100702A 2009-2010 MKS, 2010 0.8 Hr.
Taurus: Replace The Rear
Brake Pads, And Caliper
Anchor Bracket (Do Not
Use With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
2B511 D7
Brakes - Rear Brake Drag/Cyclic Noises
TSB 10-7-2
04/26/10
REAR BRAKE DRAG OR REAR BRAKE NOISE -
BUILT ON OR BEFORE 12114/2009
FORD:
2010 Taurus
2009-2010 Flex
2020 Lincoln Truck MKT FWD V6-3.7L Page 18
LINCOLN:
2009-2010 MKS
2010 MKT
This article supersedes TSB 09-26-10 to add a production fix date.
ISSUE
Some 2009-2010 Flex, MKS and 2010 Taurus and MKT built on or before 12/14/2009 may exhibit rear brake drag and/or off-brake cyclic noise.
The noise may be caused by pad to piston misalignment or corrosion on the brake caliper bracket.
ACTION
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
1. Remove the rear wheels and tires per Workshop Manual (WSM), Section 204-04.
2. Remove the rear brake pads as per WSM, Section 206-00. The notch in the caliper piston should be aligned with the pin on the backside of the
inboard brake pad. (Figure 1)
3. Replace the caliper anchor bracket and anchor bracket bolts.
a. Ensure the piston slots are aligned per WSM, Section 206-00.
b. The new caliper anchor brackets should have a small amount of grease under the brake pad spring clips.
c. Grease should not be applied to the sur[ace of the spring clips or come into contact with the pads.
4. Install new brake pads per WSM, Section 206-00.
5. Install the rear wheels and tires WSM, Section 204-04.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage IMPORTANT: Warranty coverage limits/policies
2020 Lincoln Truck MKT FWD V6-3.7L Page 19
are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
100702A 2009-2010 Flex, 2010 0.8 Hr.
MKT: Replace The Rear
Brake Pads, And Caliper
Anchor Bracket (Do Not
Use With Any Other Labor
Operations)
100702A 2009-2010 MKS, 2010 0.8 Hr.
Taurus: Replace The Rear
Brake Pads, And Caliper
Anchor Bracket (Do Not
Use With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
2B511 D7
