Disclaimer2020 Lincoln Truck MKT FWD V6-3.7L Technical Service Bulletin # 10-4-3 Date: 100315
Engine, A/T Controls - 2-3 Shift Flare/3-1 Shift Bump
TSB 10-4-3
03/15/10
6F50/6F55 TRANSMISSION - SHIFT FLARE INITIAL 2-3
SHIFT / SLIGHT DELAY/BUMP 3-1 COASTING
DOWNSHIFT BELOW 10 MPH (16 KM/H) BUILT ON
OR BEFORE 11/17/2009
FORD:
2010 Taurus, Flex
LINCOLN:
2010 MKS, MKT
ISSUE
Some 2010 Flex, MKS, MKT vehicles built on or before 10/18/09 and 2010 Taurus vehicles built on or before 11/17/2009 might exhibit an
automatic transmission shift flare on the initial 2-3 shift after a restart, and for vehicles without Eco Boost (Non GIDI) a slight delay/bump after a
3-1 coasting downshift below 10 MPH (16 Km/h). This may be caused by the powertrain control module (PCM) calibration. A new calibration is
available that will improve shift feel on initial 2-3 shift after restart and reduce the slight delay/bump after a 3-1 coasting downshift below 10 MPH
(16 Km/h).
ACTION
Reprogram the PCM to the latest calibration using IDS release 65.07 and higher. This new calibration is not included in the VCM 2010.1 DVD.
Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
100403A 2010 Flex, MKS, MKT, 0.3 Hr.
And Taurus: Reprogram
The PCM (Do Not Use
With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECAL 04
Engine, A/T Controls - 2-3 Shift Flare/3-1 Shift Bump
TSB 10-4-3
03/15/10
6F50/6F55 TRANSMISSION - SHIFT FLARE INITIAL 2-3
SHIFT / SLIGHT DELAY/BUMP 3-1 COASTING
DOWNSHIFT BELOW 10 MPH (16 KM/H) BUILT ON
OR BEFORE 11/17/2009
FORD:
2010 Taurus, Flex
LINCOLN:
2010 MKS, MKT
ISSUE
Some 2010 Flex, MKS, MKT vehicles built on or before 10/18/09 and 2010 Taurus vehicles built on or before 11/17/2009 might exhibit an
automatic transmission shift flare on the initial 2-3 shift after a restart, and for vehicles without Eco Boost (Non GIDI) a slight delay/bump after a
3-1 coasting downshift below 10 MPH (16 Km/h). This may be caused by the powertrain control module (PCM) calibration. A new calibration is
available that will improve shift feel on initial 2-3 shift after restart and reduce the slight delay/bump after a 3-1 coasting downshift below 10 MPH
(16 Km/h).
ACTION
Reprogram the PCM to the latest calibration using IDS release 65.07 and higher. This new calibration is not included in the VCM 2010.1 DVD.
Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION DESCRIPTION TIME
100403A 2010 Flex, MKS, MKT, 0.3 Hr.
And Taurus: Reprogram
The PCM (Do Not Use
With Any Other Labor
Operations)
DEALER CODING
CONDITION
BASIC PART NO. CODE
RECAL 04
